1 / 2
6.10.
0
REPLACEMENT
OF THE BRAKE PADS AND DISC
General informations:
---
Related topics:
Brake adjustment
Replacement of wheels
4
3
1
2
3
4
6
7
5a
5b
8
MODEL YEAR 2016
N…102 Hy
N…102
WORKSHOP MANUAL
WORKSHOP MANUAL
mechanical drive models only
• Remove the left-hand rear wheel.
Disconnect the control rod (1) from the lever (2) and
undo the two screws (3) which hold on the support
(4).
The support (4) contains a pad (5a) separated from
the control pistons (6) by a plate (7).
The other pad (5b) can be reached by taking off the
disc (8).
If there is oil on the pads, clean with solvent and go
over them with fine-grade abrasive paper.
Both pads should be replaced if the depth of either of
them is less than 5 mm.
Renew the disc if it is damaged, distorted or less than
4 mm thick.
BACK
