1 / 1
6.6.
0
REPLACEMENT
OF THE BLADES BELT
General informations:
---
Related topics:
Adjusting the engagement and checking
the blade brake
Belts assembly
Tightening torques
3
Steering rod fixing nut .......................... 18 ÷ 20 Nm
6
Nut for idle pulley ................................. 20 ÷ 25 Nm
8
Screw for pulley ................................... 20 ÷ 25 Nm
2
1
4
3
6
7
9
8
1
5
1
NOTE -
The blade belt guards could have different
configurations and fixings; in any case they must all
be removed, after having identified all the fixing
points.
Free the blade belt (1) from the clutch pulley (2).
Unscrew the nut (3) and disconnect the steering rod
(4) to allow passage of the belt.
Set the cutting deck to the lowest position to obtain
greater access, then dismantle the upper casing (5)
Almost totally undo the nut (6) without dismantling the
jockey pulley (7) so that the belt can be removed.
Keeping the blade locked, undo the screw (8) and
dismantle the control pulley (9) to remove the belt.
On reassembly, ensure that the belt is positioned per-
fectly in line with respect to the pins and rims.
Once assembly is completed ...
• Adjust the blade engagement.
MODEL YEAR 2016
N…102 Hy
N…102
WORKSHOP MANUAL
WORKSHOP MANUAL
BACK
