•Page
globalcontract.com
8
GLOBAL
Contract
• August 2018
INSTALLATION GUIDELINES
Column cross beam
Secure the column cross beam to the columns.
STEP 1: Drive one socket head screws 5/16-18 x 1” into column as illus-
trated. Do not tighten.
STEP 2: Position the column cross beam’s key-hole over the preinstalled
socket head screw and drive in the second socket head screw.
Note: When the column cross beam orientation is completed, one pair of the
holes will end up at the beam’s bottom (A) and the second pair of holes (B)
will point toward the centre of the table.
STEP 3: Tighten all socket head screws to ensure firm and safe column – to -
column cross bar connection.
1
2
3
A
B
