Page
•
globalcontract.com
15
• August 2018
GLOBAL
Contract
INSTALLATION GUIDELINES
Bumpers
The work top is resting on the sidebars and on shelf-adhesive rubber bumpers placed on
the crossbars. The bumpers should be placed close to the fixing screws so as to avoid the
worksurface from being bended.
The rubber bumpers come in two thicknesses. The thicker ones are used on the C-channel and
not on the fixed crossbars.Place the thin bumpers on the tube next to the screw hole and next
to the tube edge.
Two sizes of wood screws for the work top are included in the assembly kit. Wood Screw
Round 8x3/4” Zn Wood screw CSK 10x2-3/8” Zn
The shorter screws through sidebars. The longer screws through crossbars.
Bumper ø 1/2”x 1/8”
Transparent
Bumper 1/2”x 1/2”x1/4”
Transparent
Place the thin bumpers on the
tube next to the screw hole and
next to the tube edge.
Place the thick bumpers on the C-channel next
to te screw hole.
Electrical 2-Column
The handset is mounted at the front edge of the work top, screwed to the underside with the
screws supplied.
Connect cables and power supply according to
Power Supply D04 35V/2, 12A AC input 110-240V, 50-60Hz
Cable USA 2-pol IEC C7
Cable LinBus iDrive
ASM Light handed w/screws
