•Page
globalcontract.com
36
GLOBAL
Contract
• August 2018
INSTALLATION GUIDELINES
Flow Ease Installation
Connect
Preform Reset / Homing
Memory Positions
Use preset heights
Button Guide
Attach the handset to the underside of the table top using the two provides screws. If the
worksurface thickness is less than 18mm (3/4”) use shorter screws (not provided).
Connect the handset cable to one of the columns connetor ports. The second port on the
handset can be used to connect other devices.
Critical Step. At installation or if a critical component such as a column or mo-
tor is changed or disconnected, a Reset must be performed.
Note: Ensure that the area around and under the table are clear.
Set/Adjust a quick memory position. There is a quick memory position option
to set the Up and Down buttons to move the desk to a predefined height. To set
the predefined height. To set the predefined height for a button.
and
or
or
or
or
Press and hold the Up and Down buttons
at the same time.
Adjust the table to the prefered height to
be stored as a memory position.
Press and hold either the Up or Down but-
ton to move the desk to the quick memory
position. the desk will stop at the preset
height. Release the button.
Immediately press the Up or Down button
to store the current height as a quick
memory position to the selected button.
Press and hold the same button as previ-
ously to bypass the desks preset height.
Hold the buttons pressed at least 8
seconds.
Press the “M” button, and release.
Release the Up and Down buttons.
Release the Down button.
The reset process is completed
Immediately press and hold the Down
button until the desk reaches its lowest
position and stops moving.
8 seconds
Release
Release
Complete
Adjust the table upwards.
Adjust the table downwards.
- Memory - set or adjust memory
position.
M
M
M
