•Page
globalcontract.com
10
GLOBAL
Contract
• August 2018
INSTALLATION GUIDELINES
Bumpers
The worksurface is resting on the sidebars and on shelf-adhesive rubber
bumpers placed on the crossbars. These bumpers should be placed close to
the fixing screws to avoid the worksurface being bended.
The rubber bumpers come in two thicknesses. The thicker ones are used on
the C-channel and not on the fixed crossbars
Two sizes of wood screws for the work top are included in the assembly kit:
Wood screw round 8x3/4” Zn
Wood screw CSK 10x2-3/8” Zn
The shorter screws go through the sidebars. The longer screws go through the crossbars.
Place the thin bumpers on the
tube next to the screw hole and
next to the tube edge.
Place the thick bumpers on the C-channel next
to the screw hole.
Bumper ø 1/2”x 1/8”
Transparent
Bumper 1/2”x 1/2”x1/4”
Transparent
Electrical 2-Column
The handset is mounted at the front edge of the worksurface, screwed to the
underside with the screws supplied.
Connect cables and power supply according to:
Power Supply D04 35V/2, 12A AC input 110-240V, 50-60Hz
Cable USA 2-pol IEC C7
Cable LinBus iDrive
ASM Light handed w/screws
