Glenko MAM-870, Instruction Manual

Page: 24 / 60

Instruction Manual ZS100T, ZS150T & ZS200T Series II (MAM-870) Senator Industrial Air Compressors
20
1: Fixing bolt of the main motor. 2: Adjustment screw. 3: Motor Bracket.
Fig. 4-1 V-Belt Adjustment Device
When carrying out any maintenance, do not allow any oil to splash onto the V-belts or
pulleys in order to avoid belt slippage.
4.3 Air Filter
a. The dust removal method for the air filter element is to blow clean compressed at a
pressure no higher than 5 bar through it from inside to outside. Keep the air blowing
outlet more than 20 mm away from the inner surface of the filter element. After the
air filter element is cleaned 3-4 times, it should be replaced.
b. It is not permitted to hit the air filter element or to clean it with water. If the filter
element is damaged, it should be replaced. If the filter element is oily or
contaminated severely, no cleaning is practicable and element should be replaced.
c. After the air filter element is cleaned or replaced, it is necessary to hold down the
resetting button in the upper of indicator until the contamination indication is
completely reset.
d. The service life of air filter element is about 2,000 hours. If the operating
conditions of compressor are adverse, then the replacement period should be
shortened.
1
2
3