Glenko MAM-870, Instruction Manual

Page: 48 / 60

Instruction Manual M A M - 8 7 0 Senator Industrial Air Compressors
6
PARAMETER SET VALUE FUNCTION
START MODE LOCAL
When the remote mode is set, both the
buttons at machine side and the remote
control side can turn on and off the
machines.
LOAD MODE AUTO
When the manual mode is set, the
Load/Unload function can only be executed
by pressing buttons.
COM MODE PROHIBIT
When this is set as “PROHIBIT” the
communication function is not available.
When this is set as “COMPUTER” the
Controller is a slave in accordance with
MODBUS protocol communications with
external devices. Do not set as
“SEQUENCE”, because sequencing
function is not available on this model.
COM ADDRESS 0001
Enter only the selection or value shown in
the SET VALUE column. Sequencing
function is not available on this model.
SEQ STATE MASTER
Enter only the selection or value shown in
the SET VALUE column. Sequencing
function is not available on this model.
TOGGLES TIME 0000 H
Enter only the selection or value shown in
the SET VALUE column. Sequencing
function is not available on this model.
SEQ NUMBER 0000
Enter only the selection or value shown in
the SET VALUE column. Sequencing
function is not available on this model.
SEQ LOAD PRES 00.72MPa
Enter only the selection or value shown in
the SET VALUE column. Sequencing
function is not available on this model.
SEQ U.L. PRES 00.78MPa
Enter only the selection or value shown in
the SET VALUE column. Sequencing
function is not available on this model.
SEQ DELAY TIME 0030S
Enter only the selection or value shown in
the SET VALUE column. Sequencing
function is not available on this model.
OIL FILTER RST 0000 H
Reset time for the duration of oil filter
changing. Do not reset unless the filter is
replaced.
O-A FILTER RST 0000 H
Reset time for oil-air separator changing.
Do not reset unless the filter is replaced.