Glenko MAM-870, Instruction Manual

Page: 9 / 60

Instruction Manual ZS100T, ZS150T & ZS200T Series II (MAM-870) Senator Industrial Air Compressors
5
1.2.1 Air System
The typical internal structure of ZST Series II screw air compressors is shown in
Fig.1-4.
Fig. 1-4 Structure of ZST Series II Low Noise Screw Compressor
The air is sucked through the air filter and flows into the main machine of compressor
through the inlet valve for compression. The compressed oil-air mixture flows into the
oil-air tank for preliminary separation, and then into the fine oil separator. After the
oil-air separation, the compressed air flows through the minimum pressure valve and air
tank, and then it will be discharged out of the compressor and into the pipeline network
of the user.
The function of the air filter is to filter the foreign matter in the air to ensure that only
clean air enters into the compressor’s screw air end. The inlet valve can adjust the air
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
1. Air tank
2. Belt tension adjusting screw
3. Fan
4. Main motor
5. Cooler
6. Electrical control system
7. Case
8. Air filter
9. Oil separator element
10. Inlet valve
11. Oil filter
12. Screw air end
13. Combination valve
14. Safety valve
15. Pressure sensor
16. Oil-air tank
3