Glenko MAM-870, Instruction Manual

Page: 46 / 60

Instruction Manual M A M - 8 7 0 Senator Industrial Air Compressors
4
2.0 USER AND FACTORY SET PARAMETERS
2.1 Parameter View and Modification
Note: The user set parameters and factory set parameters cannot be modified
during compressor operation.
Press
▼
button once in the Menu Selection Interface to select "USE PARAMETER" for
access to the user set parameters.
Press ▼ button once more to select "FAC PARAMETER" for access to the factory set
parameters.
When the black cursor is on "USE PARAMETER", press ► button and the following
interface will appear:
Now press
►
button to bring up the following interface where the USER PASSWORD
is required:
The USER PASSWORD is 9999. Enter it using ► button to move the blinking cursor
from left to right, and use ▼ or ▲ buttons to change the numerical value. Then press
S button and the previous screen will now reappear with the additional symbol “ * ”
indicating that the password has been entered and the parameters can now be modified,
for example:
Use ▼ or ▲ buttons to scroll through the entire list of user set parameters. To modify
any value, press
►
button and the blinking cursor will appear. Press
►
button again
to move the blinking cursor from left to right, and use ▼ or ▲ buttons to change the
numerical value. Press S button to confirm the change and the blinking cursor will
disappear, or press
C
button to cancel the change.
LOAD PRES:
00.70MPa
USER PASSWORD:
****
LOAD PRES: *
00.70MPa
RUN PARAMETER
USE PARAMETER
FAC PARAMETER
MOD PARAMETER