Glenko MAM-870, Instruction Manual

Page: 44 / 60

Instruction Manual M A M - 8 7 0 Senator Industrial Air Compressors
2
1.2 Status Display and Operation
The display interface appears as follows when the unit is switched on:
The main display will change after 5 seconds to the following:
Press ► to display the following:
Press ▼ to display the Menu Selection Interface:
Press ▼ again twice to display:
1.3 Parameter Review
Pressing ► in the RUN PARAMETER menu will display the following parameters and
status:
• MAIN MOTOR CURRENT PER PHASE
• FAN MOTOR CURRENT PER PHASE
• TOTAL RUN TIME
• TOTAL LOAD TIME
• THIS RUN TIME
• THIS LOAD TIME
• OIL FILTER TIME
• O-A SEPARATOR TIME
• AIR FILTER TIME
• LUBE TIME
• GREASE TIME
PRES: 0.00MPa
SYS STOP
TEMP: 20
℃
SYS STOP
RUN PARAMETER
USE PARAMETER
FAC PARAMETER
MOD PARAMETER
SCREW
COMPRESSOR