MT BASE PLUS
GIMA SpA
44
Manuale d’Istruzioni/Instruction’s Manual
MA321IGBa
PROBLEMS SOLUTION
These are some easy solutions to the problems with
Magneto Base +
.
Problem
Solution
The main switch is switched
on but the unit doesn't work.
Inspect if the main cable is correctly inserted.
Unit is switch on but there is not
magnetc field’s output
Check if the warning light of the output is lighted.
Check if the transducers are correctly connected on the outputs OUT.
Yellow warning is not lighted
Disconnect the transducers: if after this the light will light-on please
refer to the assistance service.
At the switching on the unit does
not work correctly.
Switch off the apparatus,
wait for at least 30 seconds and after
this time try a new switch-on.
If the problems are not overcame, please refer to the qualified staff to control yours
MT BASE
PLUS
. Do not open the unit for any reasons, this could be dangerous and decline any warranty.