GIMA SpA
MT BASE PLUS
MA321IGBa
Manuale d’Istruzioni/Instruction’s Manual
19
INSTALLAZIONE E INIZIO TRATTAMENTO
Disimballare l’apparecchiatura e gli accessori, verificare che questi non abbiano subito
danni dovuti al trasporto. Nel caso vi sia la presenza (o dubbio) di danni, non utilizzare
l’apparecchiatura e/o accessori e farli verificare da personale qualificato.
Verificare che la tensione di alimentazione disponibile sia conforme con quella
richiesta.
Porre l’interruttore di alimentazione su O (spento). Inserire il cavo di alimentazione
fornito, nella presa.
Collegare l'apparecchiatura ad una presa di rete 220-240V / 50-60 Hz.
Accendere l’apparecchiatura tramite l’interruttore di alimentazione su I (acceso), sul
frontale si accendono i display delle tre grandezze d’interesse: frequenza, intensità,
tempo.
Inserire sulle uscite OUT il o i trasduttori.
Impostare tramite la tastiera della sezione “Freq” la frequenza desiderata, tramite la
tastiera della sezione “Level” l’intensità desiderata, tramite la tastiera della sezione
“Timer” il tempo desiderato.
Collegare il o i trasduttori sulla parte da trattare. Serrare i trasduttori con le fasce
fornite avendo cura di non stringerle eccessivamente, al fine di evitare impedimenti
alla circolazione sanguigna.
Per terminare il trattamento è sufficiente spegnere l’apparecchiatura.
Condizioni ambientali:
IMMAGAZZINAMENTO FUNZIONAMENTO
Temperatura ambiente
tra –10 e 50 °C
tra 10 e 40 °C
Umidità relativa
tra 10 e 85%
tra 30 e 75%
Pressione atmosferica
tra 50 e 106 kPa
tra 60kPa e 106 kPa
TRADUZIONE DEI TERMINI IN LINGUA STRANIERA PRESENTI
SULL’APPARECCHIATURA
PANNELLO POSTERIORE
PANNELLO ANTERIORE
Fuse inside
Fusibili interni
Level (Gauss)
Livello (intensità)
Made in Italy
Prodotto in Italia
Freq (Hertz)
Frequenza
Max intensity
Massima intensità
Out
Uscita
Model
Modello
Timer (min)
Temporizzatore (minuti)
Output
Frequency
Frequenza d’uscita
Power
Alimentazione