INSTALLATION
MANUAL
EN
MI_020
Rev.1
29/04/2020
Page 17 of 24
If the assembly ring comes out
before the pin is inserted,
assembly is not possible. In the
event of this coming out, it must
be repositioned in its seat.
Before continuing with the
assembly, check with swinging
arm movements that the locking
levers are in place in the pin slot.
Join together connectors (1) and (2). In case of a standard lamp
only one locking connector will be available.
In case of a lamp equipped with CCTV, the supply will include power
connectors, to be connected according to colours, and video signal
connectors, to be connected according to letters. These connectors
need to be screwed together.
Put the wires into the horizontal arm slot (3).
Place the plastic cap (4) on the upper part of the horizontal arm
making sure that the 4 tips fit into their respective seats and close
with the screws (5-6).
Tighten the clutches (7) in order to make the arm position stable.
Before proceeding, make sure
the plastic cap is correctly
positioned and in contact with
the horizontal arm and that the
screws are well tightened.
The correct closure of the plastic
cap ensures that the locking
levers are locked.
Summary of Contents for GIMAled81
Page 37: ...MANUALE D USO E MANUTENZIONE IT MU_027 Rev 1 29 04 2020 Pag 13 di 33 Modello a piantana...
Page 57: ...MANUALE D USO E MANUTENZIONE IT MU_027 Rev 1 29 04 2020 Pag 33 di 33 Note...
Page 94: ...OPERATION AND MAINTENANCE MANUAL EN MU_027 Rev 1 29 04 2020 Page 13 of 33 Mobile model...
Page 114: ...OPERATION AND MAINTENANCE MANUAL EN MU_027 Rev 1 29 04 2020 Page 33 of 33 Notes...
