14
INSTRUCTION FOR USE
•
Place the device on a flat, stable and clean surface and plug it in the wall socket. Make sure the power cord id thouroughly
unrolled to avoid dangerous overheating.
In case the power cord is damaged, contact GIMA technical assistance for replacement.
•
Prepare the HI-FLO nebulizer opening the upper part and pouring the drug prescibed by your doctor into the lower tank.
Close the nebulizer.
•
Connect the air tube into the air outlet placet above the knob of nebulization.
•
Connect the other end of air tube into the bottom of the nebulizer.
•
Connect the selected accessory to the nebulizer: child mask, adult mask, mouthpiece or nosepiece.
•
Make sure the air filter is placed properly in its seat in the bottom of the device.
Air Filter replacement:
Open the air filter cover, remove the filter and insert the new one. Place back the cover.
•
Press the ON/OFF switch to position
I
to start nebulization.
•
To interrupt or stop the treatment press again the ON/OFF switch.
•
Adjust the nebulization speedy by turning the know towards MIN for longer treatments, or towards MAX for quicker
treatments.
•
After treatment has been completed press the ON/OFF switch to position
0
and pull out the plug from the wall socket.
•
Wash the nebulizers and the accessories as explained in the Cleaning section.
•
Place back power cord and accessories into the compartments.
Always use the nebulizer facing upwards so that substances and / or medicines cannot escape from the nebulizer during the
normal use.
NEVER INHALE IN HORIZONTAL POSITION
NEVER BEND THE NEBULIZER OVER 60°
MAKE SURE THAT CHILDREN AND/OR MENTALLY ILL PEOPLE DO NOT USE THE DEVICE WITHOUT ADULT
SURVEILLANCE
ALWAYS PLACE THE DEVICE IN POSITIONS FOR EASY DISCONNECTION.
