GILES GBF-35, Operation & Service Manual

Page: 63 / 104

57
Fryer Operation
GBF − 35 / GBF − 50 Fryers
Always wear thermal protection when performing this step ... parts can be excessively hot!
15. After refilling vat, remove filter pan w/cover from fryer (see Step 3) . Use the supplied Crumb Shovel ⑪ , and
taking care not to damage or puncture the filter media, scoop filter sediment from the surface & dispose. It is
not essential that the filter media be refreshed after each filter cycle, however, it is
IMPORTANT that at a
minimum, the filter pan should be thoroughly cleaned & filter media refreshed EVERY DAY, see Section 5.02,
Cleaning Filter Pan.
16. Re
­ install filter pan, with the pan cover in place, under the unit and
reconnect coupling.
17. To continue cooking, see
Section 4.02, Cooking Procedure .
To discontinue cooking, see Section 4.05, Normal Shut ‐ Down .
4.04 Filtering Used Cooking Oil − continued
11
IMPORTANT!
With FORCE FILTER = [ON], the fryer will not exit FILTER MODE & return to normal operation until the controller
detects the following events ... 1). opening of the drain valve & 2). actual oil temperature lower than the [FILTER
RESET] temperature parameter specified in
user settings ... factory ‐ set default = 290°F. Generally, the oil will
cool sufficiently while filtering to cause the controller to reset .
For controller to properly reset from FILTER MODE, the POWER switch must remain [ON] throughout the entire
filter process. If switch is turned [OFF], the required events cannot be detected & controller will not reset.