b) Name of the Br-EFB that this AutoDownload is intended for. The name
is set on the ‘Device Settings’ dialog. The ‘Device Settings’ dialog is
accessed either by:
1) Opening the Channels List, changing the ‘Show by’ to ‘Show by
Devices’, and double clicking on the Br-EFB you will be downloading
to
2) Clicking on the ‘Device Settings’ button at the top of the
AutoDownload dialog (next to where you select the target device)
c) AutoDownload file version number (as of this writing, this will be ‘v1.1’)
d) The number of sequencers in this AutoDownload file. the Br-EFB
supports only one sequencer at a time. The ‘Device Settings’ dialog is
accessed either by:
1) Opening the Channels List, changing the ‘Show by’ to ‘Show by
Devices’, and double clicking on the Br-EFB you will be downloading
to
2) Clicking on the ‘Device Settings’ button at the top of the
AutoDownload dialog (next to where you select the target device)
e) The date and time when this AutoDownload file was created
f) Number of DMX-512 channels per universe. This will normally be 512,
unless the frame rate is set above 32 frames per second. Above about
44 frames per second, there is not enough time to send out all 512
channels. Higher speeds are not recommended for large shows on the
Br-EFB without consulting Gilderfluke & Co. first.
g) Range of DMX-512 channels in the AutoDownload file. This will
normally start with the first channel in universe ‘a’, unless the ‘first
channel’ on the AutoDownload has been offset to begin after this.
h) The name of each sequencer, along with the show that each loads at
startup and if it waits or plays the show. This is set for each sequencer
during the AutoDownload
i) The EaseIn Speed and EaseIn Threshold for each sequencer. These
are set on the ‘Sequencer Settings’ dialog. The ‘Sequencer Settings’
dialog is accessed by:
1) Opening the Channels List, changing the ‘Show by’ to ‘Show by
Sequencers’, and double clicking on the sequencer you want to
change
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-EFB Manual / May 22, 2018 3:28 PM / page 93 of 142
