Gigaset Gigaset SE555 WLAN dsl, First Steps

Page: 35 / 176

33
Basic Setup Wizard
Gigaset SE555 WLAN dsl / en / A31008-M1037-B181-1-7619 / configure_router.fm / 27.06.2006
Sc
hablone 2
005_0
5_02
ì
Specify how Internet sessions are to be established via Connection mode :
– Select Always on if the connection is to exist at all times when the Gigaset SE555
WLAN dsl is turned on.
– Select Connect on demand if applications such as a Web browser or an e-mail
program are to connect to the Internet automatically.
– In the Idle time before disconnect field, enter a period after which the Internet
connection is to end automatically if no data is transmitted (the default setting is
3 minutes).
You can deactivate this function by entering "0". This means that the connection
will continue to exist even if no data is transmitted. If you are on a time-based tar-
iff, this can result in high charges. In this case you should enter a value other than
"0".
This time setting only applies to the
Connect on request option.
– Select Connect manually if you always want to establish and end the Internet
connection manually. If you are on a time-based tariff this will save you high con-
nection charges.
PPPoE pass-through
PPPoE pass-through allows you to use an additional Internet connection (through
another service provider) on one PC. Further information about this can be found on
page 51.
ì
Deactivate PPPoE pass-through if you do not wish to use this function.
ì
After entering the data click Next > .
Note:
Connection to the Internet is only possible if you have entered all the data
for your Internet provider correctly.
Note:
This option can result in high connection charges if you are on a time-based
tariff.
Note:
If you select Connect on demand or Connect manually you can establish or
end the Internet connection manually on the start screen for the configuration
program (see page 28).