71
Configuring Advanced Settings
Gigaset SE555 WLAN dsl / en / A31008-M1037-B181-1-7619 / configure_router.fm / 27.06.2006
Sc
hablone 2
005_0
5_02
Configuring the DHCP server
The Gigaset SE555 WLAN dsl has a
DHCP server
for which the factory setting is active.
Consequently, the IP addresses of the PCs are automatically assigned by the Gigaset
SE555 WLAN dsl.
ì
To activate the DHCP server, select
On
.
ì
If the DHCP server is active, you can define a
Lease time
. The
Lease time
determines
the period for which the PCs retain the IP addresses assigned to them without chang-
ing them.
ì
Define the range of IP addresses the Gigaset SE555 WLAN dsl should use to automat-
ically assign IP addresses to the PCs. Define the
First issued IP address
and the
Last
issued IP address
.
ì
You can define the name of a domain (Windows workgroup) in the
Domain name
field.
Note:
u
If the DHCP server for the Gigaset SE555 WLAN dsl is activated, you can configure
the network setting on the PC so that the option
Obtain an IP address automat-
ically
is set up. Further information about this can be found in the section entitled
"Configuring the local network" on page 111.
u
If you deactivate the DHCP server, you will have to assign a static IP address for the
PCs that use the network settings.
Note:
If you select
Never expires
, the IP addresses are never changed. Activate this
option if you want to make NAT or firewall settings using the IP addresses of the
PCs; otherwise you have to assign static IP addresses to these PCs.
Summary of Contents for Gigaset SE555 WLAN dsl
Page 1: ...Schablone 2004_08_26 First steps...
Page 2: ...II Schablone 2004_08_26...