94
Administration
Gigaset SE555 WLAN dsl/ en / A31008-M1037-B181-1-7619 / admin_router.fm / 27.06.2006
Sc
hablone 2
005_0
5_02
After installation, the Gigaset SE555 WLAN dsl user interface is protected by the
System Password
admin
. To prevent unauthorised changes being made to the configu-
ration, you should set a new System Password from time to time. You may already have
set a System Password when you set up the
Security Setup Wizard
. If so, you can
change it here.
ì
Enter the old System Password in the
Current password
field.
ì
Enter a new system password in the
New password
field and repeat it in the
Confirm new password
field.
The System Password may contain up to 20 characters. The System Password is case
sensitive. Avoid proper names and all too obvious words. Use a combination of letters,
digits and special characters.
Idle time before log off setting:
ì
Enter the number of minutes after which the configuration program is to be ended
if no further entry is made. The default setting is 10 minutes. If you enter 0, the pro-
gram will never be ended automatically.
ì
Click
OK
to apply the settings.
Note:
If you forget your System Password, you have to reset the Gigaset SE555 WLAN dsl
(see page 18). This returns
all
your settings to the factory configuration. This means
the system password is changed back to
admin
.
Summary of Contents for Gigaset SE555 WLAN dsl
Page 1: ...Schablone 2004_08_26 First steps...
Page 2: ...II Schablone 2004_08_26...
