Gigaset Gigaset SE555 WLAN dsl, First Steps

Page: 67 / 176

65
Configuring Advanced Settings
Gigaset SE555 WLAN dsl / en / A31008-M1037-B181-1-7619 / configure_router.fm / 27.06.2006
Sc
hablone 2
005_0
5_02
ì
Click the Add button. The data for the required service is entered on the screen.
ì
Click the Delete button to delete an entry.
If the application you require is not in the list, you must enter the relevant data on the
screen manually:
ì
Local protocol : Select the protocol that is to be monitored for outgoing data traffic.
ì
Local port : Enter the port that is to be monitored for outgoing data traffic.
ì
Public protocol : Select the protocol that is to be allowed for incoming data traffic.
ì
Public port : Enter the port that is to be opened for incoming traffic.
ì
Comment : Enter a description that makes it easy to identify different entries.
ì
Activate Enabled by ticking the check box.
ì
Click the Add button to add a new entry.
ì
Click the Delete button to delete an entry.
ì
Apply the settings by clicking OK .
Port Forwarding
If you configure Port Forwarding, the Gigaset SE555 WLAN dsl outwardly assumes the
role of the server. It receives requests from remote users under its public IP address and
automatically redirects them to local PCs. The private IP addresses of the servers on the
local network remain protected.
Internet services are addressed via defined port numbers. The Gigaset SE555 WLAN dsl
needs a mapping table of the port numbers to redirect the service requests to the serv-
ers that actually provide the service.
Port Forwarding has been configured for this purpose.
ì
To set up port forwarding for a service, select Port Forwarding from the Address
Translation (NAT) menu.
Note:
You can use a single port number, several port numbers separated by commas,
port blocks consisting of two port numbers separated by a dash, or any combina-
tion of these, for example
80.90-140.180
.