Gigaset Gigaset SE555 WLAN dsl, First Steps, Page: 101 / 176

99
Administration
Gigaset SE555 WLAN dsl/ en / A31008-M1037-B181-1-7619 / admin_router.fm / 27.06.2006
Sc
hablone 2
005_0
5_02
After a successful update, the device is automatically rebooted. All LEDs go out. The
login screen is displayed again.
To see whether the upgrade procedure was successfully completed, check the current
software version displayed in the overview of the
Status menu (see page 100).
System Log
The System Log is displayed in the Status – Device menu. It contains important infor-
mation about how the device functions and possible problems. This information can
also be automatically transferred to a system log server.
ì
In the Administration menu, select System Log to make the settings for the log.
ì
Log level : Specify how much information is to be contained in the system log. You
can choose between four levels:
–
Critical : Log file of the most important information for possible device function-
ality problems
– Debugging : Complete and detailed information on all device functions
– Warning and Informational are intermediate levels.
ì
System log server
– Activate this function if the device system log is to be automatically transferred
to a system log server in the local network.
– Server address :
Enter the IP address for the system log server.
– Server port :
Enter the port of the system log server that is to be used to transfer the system
log.
ì
Click OK to save and apply the changes.