GL-VP-150
User Manual
Copyright © 2009-2011 GigaLink
Page 22 of 37
2.
Static IP mode
: configure all of the following fields: IP
address, Subnet Mask, Default Router IP address, DNS
Server 1 (primary), DNS Server 2 (secondary). These
fields are set to zero by default.
Speed Dail Key1~6
GL-VP-150 has define 6 speed dial keys. After you
program numbers for this key. You can touch a speed dial
key and then the call will be originated.
Time Zone
This parameter controls the date/time display according to
the specified time zone.
Daylight Savings Time
This parameter controls time displayed in daylight savings
time. If set to “Yes”, then the displayed time will be 1 hour
ahead of normal time.
The “Optional Rule” is configured to automatically adjust
the Daylight Savings Time (DST) based on the rule set in
this field.
Rule Syntax:
• start-time; end-time; saving
• Both start-time and end-time have the same syntax:
month, day, weekday, hour, minute
o month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
o day: [+|-]1,2,3,..,31
o weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0
which means the daylight saving rule is not
based on week days but based on the day of the
month.
o hour: hour (0-23), minute: minute (0-59)
If “weekday” is 0, it means the date to start or end daylight
saving is at exactly the given date.
In that case, the “day”
value must not be negative. If “weekday” is not zero and
“day” is positive, then the daylight saving starts on the first
“day” the iteration of the weekday (e.g.: 1st Sunday, 3rd
Tuesday etc). If “weekday” is not zero and “day” is
negative, then the
daylight saving starts on the last “day”
the iteration of the weekday (e.g.: last Sunday, 3rd last
Tuesday etc).
The saving is in the unit of minutes. The saving time may
also be preceded by a negative (-) sign if subtraction is
desired instead of addition.
The default value is set for US, the “Automatic Daylight
Savin
g Time Rule” shall be set to “3,2,7,2,0;11,1,7,2,0;60”
