GL-VP-150
User Manual
Copyright © 2009-2011 GigaLink
Page 29 of 37
the SIP server to keep the “hole” on the NAT open.
SIP User ID
SIP service subscriber‟s User ID
Authenticate ID
SIP service subscriber‟s Authenticate ID. Can be identical to or
different from SIP User ID
Authenticate
Password
SIP service subscriber‟s account password
Name
SIP service subscriber‟s name which will be used for Caller ID
display
Use DNS SRV
Default is No. If set to Yes the client will use DNS SRV for
server lookup
User ID is Phone
Number
If the GL-VP-150 has an assigned PSTN telephone number, this
field should be set to “Yes”. Otherwise, set it to “No”. If “Yes” is
set, a “user=phone” parameter will be attached to the “From”
header in SIP request
SIP Registration
This parameter controls whether the GL-VP-150 needs to send
REGISTER messages to the proxy server. The default setting is
“Yes”.
Unregister
on
Reboot
Default is “No.” If set to “Yes”, then the SIP user will be
unregistered on reboot.
Register Expiration
This parameter allows the user to specify the time frequency (in
minutes) the GL-VP-150 refreshes its registration with the
specified registrar. The default interval is 60 minutes (or 1 hour).
The maximum interval is 65535 minutes (about 45 days).
Outgoing call without
Registration
Default is
No
. If set to “Yes,” user can place outgoing calls even
when not registered (if allowed by ITSP) but is unable to receive
incoming calls.
Local SIP port
This parameter defines the local SIP port the GL-VP-150 will
listen and transmit. The default value for FXS port is 5060. The
default value for FXO port is 5062.
Local RTP port
This parameter defines the local RTP-RTCP port pair the
GL-VP-150 will listen and transmit. It is the base RTP port for
channel 0. When configured, channel 0 will use this port _value
for RTP and the por1 for its RTCP; channel 1 will use
por2 for RTP and por3 for its RTCP. The
default value for FXS port is 5004. The default value for FXO
port is 5008.
Use Random Port
This parameter, when set to Yes, will force random generation
of both the local SIP and RTP ports. This is usually necessary
when multiple GL-VP-150 are behind the same NAT.
Refer-To Use Target
Contact
Default is NO. If set to YES, then for Attended Transfer, the
“Refer-To” header uses the transferred target‟s Contact header
