GL-VP-150
User Manual
Copyright © 2009-2011 GigaLink
Page 33 of 37
from designated account will play selected ring tone.
Disable Call -Waiting
Default is No.
Disable Call
–Waiting
Tone
Default is
No
. This is to disable the stutter Call Waiting Tone
when a Call Waiting call arrives. The CWCID will still be
displayed.
Ring Timeout
Incoming call will stop ringing when not picked up given a specific
period of time.
Early Dial
Default is No. Use only if proxy supports 484 response
Dial Plan Prefix
Sets the prefix added to each dialed number
Use # as Send Key
This parameter allows users to configure the “#” key to be used
as the “Send” (or “Dial”) key. If set to “Yes”, pressing this key will
immediately trigger the sending of dialed string collected so far. In
this case, this key is essentially equivalent to the “(Re)Dial” key. If
set to “No”, this “#” key will then be included as part of the dial
string to be sent out.
Dial Plan
Dial Plan Rules
:-
1. Accept Digits: 1,2,3,4,5,6,7,8,9,0
2. Grammar: x - any digit from 0-9;
a. xx+ - at least 2 digit number;
b. ^ - exclude;
c. [3-5] - any digit of 3, 4, or 5;
d. [147] - any digit 1, 4, or 7;
e. <2=011> - replace digit 2 with 011 when dialing
•
Example 1:
{[369]11 | 1617xxxxxxx}
–
Allow 311, 611, 911, and any 10 digit numbers of leading digits
1617
•
Example 2:
{^1900x+ | <=1617>xxxxxxx}
–
Block any number of leading digits 1900 and add prefix 1617 for
any
dialed 7 digit numbers
•
Example 3:
{1xxx[2-9]xxxxxx | <2=011>x+}
–
Allow any length of number with leading digit 2 and 10
digit-numbers of
leading digit 1 and leading exchange number between 2 and 9;
If leading
digit is 2, replace leading digit 2 with 011 before dialing
3. Default: Outgoing - {x+}
Subscribe for MWI
Default is No. When set to “Yes” a SUBSCRIBE for Message
Waiting Indication will be sent periodically.
