GIGA-BYTE TECHNOLOGY TO22-C20 User Manual Download

Page: 108 / 123

- 108 -

BIOS Setup

There are two types of passwords that you can set:

•

Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

•

User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable

this field, a Administrator Password must first be set. A user can only access and modify the

System Time, System Date, and Set User Password fields.

Administrator Password

Press [Enter] to configure the administrator password.

User Password

Press [Enter] to configure the user password.

Secure Boot

Press [Enter] for configuration of advanced items.

5-5 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

Summary of Contents for TO22-C20




























































































































Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY TO22-C20, User Manual

Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands