GIGA-BYTE TECHNOLOGY TO22-C20 User Manual Download

Page: 29 / 123

- 29 -

System Hardware Installation

3-5-4 Intel Optane DCPMM DIMM Population Rule

Thermal conditions for DCPMM DIMM support:

•

The ambient temperature must be at or below 35°C

•

The Cascade Lake CPU used must have a maximum TDP of 205W

•

A maximum of 4 pcs 128G DCPMM may be installed (1 Node)

• RDIMM / DCPMM must be installed into CPU0 memory first
•

You must install one RDIMM into any slot #0 of CPU0 before installing the DCPMM.
(e.g. A0/B0/C0/D0/E0/F0)

•

The DCPMM must be installed into the DIMM slot #1 next to the corresponding RDIMM
in slot #0 (e.g. if RDIMM is installed into DIMM slot A0, the DCPMM must be installed into
DIMM slot A1)

F0/RDIMM Slot

E0/RDIMM Slot

D0/RDIMM Slot

D1/Intel Optane DCPMM Slot

A1/Intel Optane DCPMM Slot

A0/RDIMM Slot

B0/RDIMM Slot

C0/RDIMM Slot

G1/Intel Optane DCPMM Slot

G0/RDIMM Slot

H0/RDIMM Slot

I0/RDIMM Slot

L0/RDIMM Slot

K0/RDIMM Slot

J0/RDIMM Slot

J1/Intel Optane DCPMM Slot

CPU1

&38

Summary of Contents for TO22-C20




























































































































Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY TO22-C20, User Manual

Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands