manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY TO22-C20, User Manual

Share
Download
GIGA-BYTE TECHNOLOGY TO22-C20 User Manual Download Page 71

BIOS Setup

- 71 -

  Hyper-Threading [All]

 

The Hyper Threading Technology allows a single processor to execute two or more separate threads 
concurrently. When hyper-threading is enabled, multi-threaded software applications can execute their 

threads, thereby improving performance.

 

Options available: Enable/Disable. Default setting is 

Enable

.

  Enable Intel(R) TXT

 

Enables ord isables the Intel Trusted Execution Technology support function.

 

Options available: Enable/Disable. Default setting is 

Disable.

  VMX (Vanderpool Technology)  

 

Enable/Disable the Vanderpool Technology. This will take effect after rebooting the system.

 

Options available: Enable/Disable. Default setting is 

Enable

.

  Enable SMX

 

Enable/Disable the Secure Mode Extensions (SMX) support function. 

 

Options available: Enable/Disable. Default setting is 

Disable

.

  Hardware Prefetcher  

 

Select whether to enable the speculative prefetch unit of the processor. 

 

Options available: Enable/Disable. Default setting is 

Disable

.

  Adjacent Cache Prefetch   

 

When enabled, cache lines are fetched in pairs. When disabled, only the required cache line is fetched.  

 

Options available: Enable/Disable. Default setting is 

Enable

.

  DCU Streamer Prefetch   

 

Prefetches the next L1 data line based upon multiple loads in same cache line.  

 

Options available: Enable/Disable. Default setting is 

Enable

.

  DCU IP Prefetch

 

Prefetches the next L1 Data line based upon sequential load history.  

 

Options available: Enable/Disable. Default setting is 

Enable

.

  AES-NI   

 

Enable/Disable the AES-NI (Intel Advanced Encryption Standard New Instructions) support function.

 

Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for TO22-C20




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands