manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY TO22-C20, User Manual

Share
Download
GIGA-BYTE TECHNOLOGY TO22-C20 User Manual Download Page 106

- 106 -

BIOS Setup

5-4-3  BMC Network Configuration

 

 Select NCSI and Dedicated LAN  

 

 

Switch NCSI and dedicated LAN and send KCS command.

 

Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3 (Failover).

 

Default setting is 

Mode1 (Dedicated)

.

  

Lan Channel 1 

  

  

Configuration Address source

 

Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option will not 

modify any BMC network parameters during BIOS phase.

 

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting is 

DynamicBmcDhcp

.

  

Station IP address 

  

 

Displays IP Address information.

  

Subnet mask

   

 

Displays Subnet Mask information.

 

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

  

Router IP address

   

 

Displays the Router IP Address information. 

  

Station MAC address

   

 

Displays the MAC Address information. 

  

Real-time synchronize BMC network parameter values

   

 

Press [Enter] to synchronize the BMC network parameter values. 

Summary of Contents for TO22-C20




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands