GIGA-BYTE TECHNOLOGY TO22-C20 User Manual Download

Page: 112 / 123

- 112 -

BIOS Setup

5-6 Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error

message if the legacy drive(s) specified is not bootable.

Boot Configuration

Setup Prompt Timeout

Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting.

Press the numeric keys to input the desired values.

Bootup NumLock State

Enable/Disable the Bootup NumLock function.

Options available: On/Off. Default setting is

Quiet Boot

Enable/Disable showing the logo during POST.

Options available: Enabled/Disabled. Default setting is

Enabled

Boot mode select

Selects the boot mode.

Options available: LEGACY/UEFI. Default setting is

UEFI

FIXED BOOT ORDER Priorities
Boot Option #1/#2/#3/#4/#5

Press [Enter] to configure the boot priority.

By default, the server searches for boot devices in the following secquence:

1.  Hard drive.
2.  CD-COM/DVD drive.
3.  USB device.
4.  Network.
5.  UEFI.

Summary of Contents for TO22-C20




























































































































Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY TO22-C20, User Manual

Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands