GIGA-BYTE TECHNOLOGY TO22-C20 User Manual Download

Page: 102 / 123

- 102 -

BIOS Setup

5-4 Server Management Menu

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).

Options available: Enabled/Disabled. Default setting is

Disabled

FRB-2 Timer timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is

6 minutes

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is

Do Nothing

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog Timer

Enable/Disable OS Watchdog Timer function.

Options available: Enabled/Disabled. Default setting is

Disabled

OS Wtd Timer Timeout

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is

10 minutes

Please note that this item is configurable when OS Watchdog Timer is set to Enabled.

OS Wtd Timer Policy

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is

Reset

Please note that this item is configurable when OS Watchdog Timer is set to Enabled.

Summary of Contents for TO22-C20




























































































































Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY TO22-C20, User Manual

Search results

Summary of Contents for TO22-C20

Reviews:

Related manuals for TO22-C20

Brands by name

Popular brands