background image

NOTICE

The information in this guide is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN;
NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.

This guide contains information protected by copyright.  No part of this guide may be
photocopied or reproduced in any form without prior written consent from Compaq
Computer Corporation.

© 1995 Compaq Computer Corporation.

All rights reserved.  Printed in the U.S.A.

Compaq, Systempro, Deskpro, Compaq Insight Manager,

Registered U.S. Patent and Trademark Office.

ProSignia, Systempro/XL, ProLiant, NetFlex, ROMPaq, and QVision are trademarks of

Compaq Computer Corporation.

The software described in this guide is furnished under a license agreement or
nondisclosure agreement.  The software may be used or copied only in accordance with
the terms of the agreement.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.

MAINTENANCE AND SERVICE GUIDE

Compaq ProLiant 4500 Servers

First Edition (May 1995)

Text Number 188470-001

Summary of Contents for ProLiant 4500 Servers


























































































Reviews: