GIGA-BYTE TECHNOLOGY TO22-C20 User Manual Download Page 54

Page: 54 / 123

- 54 -

BIOS Setup

5-2-5 Serial Port Console Redirection

COM1/COM2 Serial Over LAN Console Redirection

(Note)

Select whether to enable console redirection for specified device. Console redirection enables the users

to manage the system from a remote location.

Options available: Enabled/Disabled. Default setting is

Disabled

Legacy Console Redirection

Selects a COM port for Legacy serial redirection. The options are dependent on the available COM
ports.

Serial Port for Out-of-Band Management/Windows Emergency Management Services

(EMS) Console Redirection

(Note)

Selects a COM port for EMS console redirection. EMS console redirection allows the user to configure

Console Redirection Settings to support Out-of-Band Serial Port management.

Options available: Enabled/Disabled. Default setting is

Disabled

COM1/COM2 Serial Over LAN/Legacy/Serial Port for Out-of-Band EMS Console

Redirection Settings

Press [Enter] for configuration of advanced items.

Please note that this item is configurable when COM1/COM2 Serial Over LAN/Serial Port for Out-

of-Band Management EMS Console Redirection is set to Enabled

(Note) Advanced items prompt when this item is defined.

Summary of Contents for TO22-C20




























































































































Search results

Summary of Contents for TO22-C20

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY TO22-C20, User Manual

Search results

Summary of Contents for TO22-C20

Reviews:

Brands by name

Popular brands