7.
CLEANING
AND
MAINTENANCE
SIRIO 500 BANCO - 500 - 600 39
7.4. Possible anomalies
Listed below are possible failures and/or anomalies. Any remedial action
must be carried out in accordance with the instructions, if any.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The machine does
not turn on
Lack of power
Check that the plug is properly
inserted, that the main switch
is on I (ON) and that the
room's power line protections
have not been tripped; if
necessary, restore them.
An electrical protection has
tripped (e.g. thermal switch)
Restore the protection that has
tripped
(extraordinary
maintenance)
The machine does
not start
An interlocked guard is not
fully lowered
Lower it completely
A micro-switch associated
with one of the guards is faulty
Have it replaced (extraordinary
maintenance)
There are creases
and/or tears in the
dough sheet
Uneven belt speed
Check
and,
if
necessary,
adjust the tension of the belt(s)
Dirty sheeting rollers
Clean the rollers and, if
necessary, clean or replace
the scrapers
Summary of Contents for SIRIO 500
