GGM gastro SIRIO 500, Manual For Installation, Use And Maintenance

Page: 36 / 70

7. CLEANING AND MAINTENANCE
SIRIO 500 BANCO - 500 - 600 36
7.3.2. Lower sheeting roller scrapers
There are two independent scrapers on the bottom sheeting roller, flush
with the relative belts.
SIRIO 500 BANCO - 500:
IMPORTANT! To disassemble the scraper on the left of the sheeting
roller (looking from the control side), first remove the upper scraper
unit (see par. 7.3.1).
With reference to Figure 7.3, to disassemble a scraper ref. 1 completely
lower the lever ref. 2 (photos A - B); the scraper will detach from the belt
and the sheeting roller and it will be possible to remove it with an upwards
motion (photos C - D).
To fit a scraper
ref. 1:
- lower the scraper unit ref. 4 into the space ref. 5 between belt ref. 6 and
sheeting roller ref. 7; the recess ref. 8 of the plates ref. 9 must be facing
away from the roller ref. 7 (photo E);
-
let the scraper ref. 1 rest at the end of travel at the bottom (photo F),
then raise the lever ref. 2 until you hear a click (photo F); if the lever is
unintentionally raised excessively, thus passing the point of the first click
(photo G), lower it until you hear the click again (photo F).