gfm GF-Primo Dolly, Instruction Manual And Safety Manuallines

Page: 69 / 92

68
11.4.1.4.2 PLAY Mode - Abspielen einer gespeicherten Fahrtsequenz
Attention: Before replaying a recorded sequence, ensure that the complete lift range of the column is
clear from obstructions.
Proceed as follows:
Change to PLAY mode by pressing the mode selector button on the underneath of the HCU.
If you have more than 1 sequence recorded scroll to the required file with the Rocker Switch
and press the OPEN button to select the file.
As soon as the recorded sequence is opened a start position S will appear beside the height
bar indicator.
To commence with the play back, drive manually to the start position using the Rocker Switch.
Upon reaching the S position the time bar in the top left hand corner of the display will indicate
that the sequence can now be replayed.
To replay the sequence, press and hold down the Rocker Switch.
INFO:
To replay the sequence it doesn’t matter whether the Rocker Switch is pressed up or
down or how hard it is pressed. The play back will stop when the Rocker Switch is let
go. To proceed further press the Rocker Switch again.
The sequence is over when FINISH appears on the display.
To return to other stored sequence files press the EXIT button to activate PLAY Modus. Now,
upon selection, you can replay any stored sequences.