gfm GF-Primo Dolly, Instruction Manual And Safety Manuallines

Page: 54 / 92

53
11.4
HCU Modes and the respective Display
The software allows for a range of modes to be selected indicating various settings and providing
specific information on the display.
11.4.1 NORMAL Mode
Offers standard movement with a selection of speeds and ramps. Lower and upper limits can be set.
(For setting RMP and SPD se
e „11.2.1).
The complete lift range is available from 0 to 705 mm.
Here is an example of the Display in Normal Mode:
Column height / position
Motor temperature, °Celsius
Voltage of columns batteries
Column scale/ position shown in mm
(also available in ft or %)
RMP = Ramp (sets strength of
acceleration and deceleration of
column: hard

00; soft

22)
SPD = Speed (sets speed of columns
travel: slow

00; fast

22)
HCU Battery status
Limit to restrict the columns lift range
(e.g. from 200mm
– 500mm)
)
Selected User = U1
Choice of 4 users. U1 to U4,
HCU Mode