gfm GF-Primo Dolly, Instruction Manual And Safety Manuallines

Page: 59 / 92

58
Explanation of the individual display symbols:
Currently selected or next MARKER:
Shows the MARKERs that can currently be set, over written or deleted.
Already set MARKER:
Shows already set MARKERs that can be over written or deleted and are indicated beside the Vertical
Bar display.
MARK-Button:
With the MARK-Button already set MARKERs can be selected and then with the SET or CLR buttons
be over written or deleted.
CLR-Button:
With the CLR-Button already set MARKERs can be deleted
SET-Button:
With the SET-Button MARKERs can be set or over written.
.
11.4.1.2.1 Setting individually adjustable MARKERS
To set MARKERs, Mode E must be selected.
Setting MARKERs in a numerical sequence:
Press the MARK-Button until the digit 1 shows on the display as the currently selected MARKER.
By using the Rocker Switch drive the column to the required height and stop in this position.
Now press the SET-Button, to allocate MARKER 1 to this position.
The digit 2 will show on the display as the next MARKER that can be set.
Again, by using the Rocker Switch drive the column to the required height and stop in the required
next position.
Now press the SET-Button again to allocate MARKER 2 to this position.