gfm GF-Primo Dolly, Instruction Manual And Safety Manuallines

Page: 9 / 92

8
Locking shaft & knob
Open the left and right locking
knob to mount the battery. When
in place, hand tighten the knobs
to secure the battery.
3 The GF-Primo Dolly
3.1
Changing the batteries
The
dolly’s batteries are connected to the column with a user friendly “drop & go”
system. The column requires 2 x 24Volt Battery units to function.
Centre the battery over the locking mount. Move the battery into position and drop it
gently onto the locking shaft. Store the carrying handle underneath the battery.
3.2
Connecting the Platforms:
3.2.1 The Multifunctional Platform Set:
The platform set consists of 4 units. Each platform is machined to provide a selection
of threaded (10
mm & 3/8”) and non-threaded holes (12, 25 & 28mm).
3 of the units are identical and fit on any of the 3 sides of the dolly. The 4th unit is
machined slightly differently and fits only on the side of the dolly where the steering
gearbox is located.