GEZE UFO-NT F, Wiring Diargam

Page: 53 / 80

UFO-NT
53
Service menu
27.3.4 Door parameters
Name 1 Sub-menu 2 Sub-menu Explanation
Number of leaves 1-leaf drive
2-leaf active
2-leaf passive
The parameters are used to set
the leaf on which the drive is
installed.
Leaf width Value: 11 x10 cm
Min 06 x10 cm
Max 11 x10 cm
Door weight Value: 100 kg.
200 kg.
The door weight influences the
safe speed.
Control type DCU8
DCU8 _ F
DCU8 _ I
Display only
Type of installation UFO-NT
Underfloor drive
Drive type Spring power closes
Spring power opens
Basic function Auto mode Auto mode
Drive ser. no. 000000000000
Entry of the serial number
Maintenance by operating time
by cycles
by operating time
Value 12
months
min 0 months
max 99 months
after cycles
Value 500,000
min 0
max 3000,000
Cycle counter incremented:
à
Each time the opening posi-
tion is reached after auto-
matic activation
à
When the standstill posi-
tion is reached after manual
opening, if drive then wants
to close.
Electric strike type No electric strike
Fail-secure
Fail-safe
Motor lock
Electric strike type, drive, has no
closing force before opening.
Working-close pres-
sure
Static-close pressure
Motor-close pressure
Drive has closing force before
opening.
Opening delay Day Value: 0 s *0.1
min 0 s *0.1
Max. 90 s *0.1
Opening delay day:
Time before the drive opens
the door.
Only applies in the automatic,
exit only operating modes.
Opening delay Night Value: 0 s *0.1
min 0 s *0.1
Max. 90 s *0.1
Opening delay night: Time
before the drive opens the door
Only applies in the night operat-
ing mode.
ECO mode not active
active
The 24 V supply to terminal 4 is
switched off in the DO, NA and
OFF modes of operation.
Note: Activation via access
control of KB in the event of
NA, as well as closing the door
when switching from DO to AU,
requires a few seconds, as the
system first has to boot up.
GEZE bus address Value: 0 value
min 0 value
max 99 value
For DCU103