Gestetner DSm520pf User Manual Download Page 259

Page: 259 / 278

NSTALLING

ACHINE

PTIONS

B.6

Place the machine over the tray, aligning the feet on the
machine with the positioners on the tray.

Plug the interface cable of the tray into the connector on the
back of the machine.

Load paper in the tray. The instructions for loading paper in
this tray are the same as for loading the standard paper

tray. See page 2.7.

After loading paper, you need to set the paper type and size
for Tray 2. See page 2.21.

Reconnect the power cord and cables and then turn the
machine on.

Lifting handles are
located at the
lower edge of both
sides of the
machine.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for DSm520pf























































































































































































































































































Search results

Summary of Contents for DSm520pf

Reviews:

Brands by name

Popular brands

Gestetner DSm520pf, User Manual

Search results

Summary of Contents for DSm520pf

Reviews:

Brands by name

Popular brands