Setting Up
20
2
How to Use the Screwdriver
The exclusive screwdriver used for attaching options is attached to the inside of
the front cover. By pushing the screw top into the screwdriver, you can work
without having to worry about dropping the screw.
Note
❒
After using the screwdriver, return it to its original position on the inside of
the front cover.
Installing the Paper Feed Unit
Preparation
If you want to use the optional Du-
plex Unit, 2 Tray Finisher or 4-bin
Mailbox at the same time, install
the optional Paper Feed Unit first,
and then install these options.
If you have already installed the
optional Duplex Unit, 2 Tray Fin-
isher and 4-bin Mailbox, remove
all these options before installing
the optional Paper Feed Unit.
Important
❒
Before installation, check the ori-
entation of the Paper Feed Unit or
2000-sheet Large Capacity Tray
you want to place.
❒
When installing multiple options,
install the Paper Feed Unit first.
❒
Four persons are needed to install
the Paper Feed Unit. Start the in-
stallation work after all four per-
sons are ready.
R
CAUTION:
Note
❒
The printer weights approximately
77 kg (170 lbs).
ZDJP003J
•
When moving the machine, each
person should hold the handle,
where two are located on oppo-
site sides, and lift slowly. Lifting it
carelessly or dropping it may
cause an injury.
