Setting Up
24
2
Installing the PAPER FEED UNIT Type
3800C (500 x 2)
Preparation
If you want to use the optional Du-
plex Unit, 2 Tray Finisher or 4-bin
Mailbox at the same time, install
the optional Paper Feed Unit first,
and then install these options.
If you have already installed the
optional Duplex Unit, 2 Tray Fin-
isher and 4-bin Mailbox, remove
all these options before installing
the optional Paper Feed Unit.
Important
❒
Before installation, check the ori-
entation of the Paper Feed Unit
you want to place.
❒
When installing multiple options,
install the Paper Feed Unit first.
R
CAUTION:
Note
❒
The 1000-sheet Paper Feed Unit
weights approximately 25kg (55.2
lbs).
A
Turn off the power switch and
unplug the power cable.
B
Remove the adhesive tape.
C
Adjust the four corners of the
printer to those of the 1000-sheet
Paper Feed Unit, and then lower
the printer slowly into place.
Important
❒
Four persons should hold the
handles, located on two sides of
the printer, to move it.
•
When moving the Paper Feed
Unit, hold the bottom of both
sides, and lift slowly. Lifting it
carelessly or dropping it may
cause an injury.
ZDJP013J
ZDJP014J
ZDJP007J
