Installing Options
31
2
Installing the 1394 Interface
Unit Type1045
Important
❒
Windows 2000 is the only operating
system that can output to a printer
with the 1394 Interface Unit.
❒
Outputting is not possible with Win-
dows 95, 98, or Me. If the "plug and
play" function starts, click
[
Cancel
]
.
❒
The 1394 Interface Unit Type1045
requires the optional Memory Unit
at least 64 MB or more.
❒
In Windows 2000, the 1394 Inter-
face Unit can only be used with Ser-
vice Pack 1 or later. If the Service
Pack is not installed, the connect-
able number of devices in a 1394
bus is only one, and the client can-
not access the 1394 Interface Unit
without using an account that has
the Administrators permission.
❒
The 1394 Interface Unit cannot re-
ceive data from more than one PC at
the same time. If it happens, an error
message appears. The printer can ac-
cept data sent from other PCs only
after the first print job has finished.
❒
Bidirectional transmissions are not
supported by the 1394 Interface Unit.
❒
Be sure to touch a metal object be-
fore touching the 1394 Interface
Unit to discharge static electricity.
Even a small amount of static elec-
tricity can damage the unit.
❒
Do not subject the 1394 Interface
Unit to physical shocks.
❒
Do not loop the 1394 interface cable.
❒
Use the 1394 Interface cable that
comes with 1394 Interface Unit.
Reference
For more information, see the
Manual that comes with the 1394
Interface Unit.
A
Check the contents of the box.
❖
❖
❖
❖
1394 Interface Unit Type1045
❖
❖
❖
❖
Four Screws
❖
❖
❖
❖
Interface Cable (6 pin
××××
6 pin)
❖
❖
❖
❖
Interface Cable (6 pin
××××
4 pin)
Note
❒
Use the screwdriver attached to
the inside of the front cover of
the machine for two screws.
❒
You will not use the two smaller
screws.
B
Turn off the power switch and
unplug the power cable and in-
terface cable.
