Setting Up
56
2
I
Fasten the 4-bin Mailbox with
two screws using provided screw-
driver.
Reference
See P.20
“How to Use the Screw-
driver”
.
Note
❒
Be sure to return the provided
screwdriver to its original posi-
tion on the inside of the front
cover.
J
Close the upper left cover.
If the Duplex Unit is installed, pro-
ceed to step
L
.
K
Install the External Tray to the
printer. Hook the External Tray to
the slits of the printer, and then
lower the tray toward you.
L
If the Duplex Unit is installed, re-
turn the Duplex Reversal Unit to
its original position. Lift it slowly
until you hear a click.
M
Remove the adhesive tape of the
cable of the 4-bin Mailbox.
N
Check that the cable of the 4-bin
Mailbox is in the position as
shown in the illustration.
If it is not, change its position in the
direction of (
A
)
⇒
(
B
).
ZDJP095J
ZDJP096J
ZDJP098J
ZDJP994J
ZDJP091J
