Installing Options
53
2
B
With the 2 Tray Fnisher Tray
laid horizontally, slide it in at a
slant until it stops.
C
Fasten the Fnisher Tray with a
short screw using provided
screwdriver.
D
Use the same steps (steps
B
and
C
) to install the other 2
Tray Fnisher Trays.
Note
❒
Be sure to return the provid-
ed screwdriver to its original
position on the inside of the
front cover.
U
Return the Fnisher Tray that is in-
stalled on the Duplex Unit back
into place.
A
Lift the top.
B
Lower slowly.
Note
❒
After finishing all installa-
tion for printing, you can
check whether the Finisher is
installed properly. Print the
Configuration Page from the
"List/Test Print" menu. If it is
installed properly, you will
see "2 Tray Finisher" under
the "Options" list.
❒
If the Finisher is not installed
properly, reinstall from step
A
. If you cannot install it
properly even after reinstal-
lation, contact your sales or
service representative.
Reference
See P.68
“Test Printing”
.
ZDJP083J
ZDJP084J
ZDJP085J
ZDJP086J
