Setting Up
32
2
C
Remove two screws that are fas-
tening the Controller Board on
the back of the printer using pro-
vided screwdriver.
Reference
See P.20
“How to Use the Screw-
driver”
.
The removed screws will be used
later to fasten the C ontroller
Board.
D
Holding the handle, pull out the
Controller Board slowly.
E
Put the Controller Board in a flat
place.
F
Remove the small cover plate us-
ing p rovided s crew drive r as
shown in the illustration.
Note
❒
You will not use the removed
screws.
G
Install the 1394 Interface Unit on
the Controller Board. Insert the
tip of the 1394 Interface Unit into
the attachment area (
A
A
A
A
), and push
it in the direction of the arrow
(
B
B
B
B
).
Confirm that the 1394 Interface
Unit is connected firmly to the
Controller Board.
ZDJP025J
ZDJP025J
ZDJP122E
ZDJP120J
