15
Vapodest 45s
4.6.1. Description of rear view upper part
1 Diaphragm pump for H
3
BO
3
- Item-No. 1001736
Connection pipe for PVC-tubing 4/7, connection to the storage tank "H
3
BO
3
"
2 Diaphragm pump for H2O sample, Item-No. 1001736
Connection pipe for PVC-tubing 4/7, connection to the storage tank "H
2
O".
3 Diaphragm pump for H2O steam generator, Item-No. 1001736
Connection pipe for PVC-tubing 4/7, connection to the storage tank "H
2
O".
4 Wall duct
Duct for the titration liquid tube as well as the cable for the electrode (only by
using with titrator).
5 Level detector
Connector for diode plug, 3-pin (level detector for set of storage tanks)
6 Appliance plug for mains cable
The enclosed mains cable is plugged in here
7 Excess current switch, 10A,
Equipment is cut off automatically if there is excess current
8 2 x Interface RS 485
9 Interface RS 232
Prepared to take the external titrator.
10 Outlet ventilation tubing (protected)
Ventilation for steam generator, here hot steam can escape
11 Excess pressure - steam outlet
Safety device to let steam escape in case of overpressure in the boiler.
12 Excess temperature fuse,
Safety measurement to turn off heating if the water level in the steam generator
drops so low that the heating cartridge is not covered any more. See also eror
message in chapter 9.
13 Identification plate with serial number of the instrument
Please make sure to always refer to the serial number in any case of service
problem.
14 Cooling water inlet with sieve, Item-No. 1000363
Anschlussgewinde 3/4 Zoll für Wasserzulaufschlauch 10/17.
15 Water outlet
Connection pipe for PVC-tubing 8/12, connection to water outlet
16* Peristaltic pump for receiver, Item-No. 1000084
Connection pipe for PVC-tubing 8/12, connection to water outlet
17 Peristaltic pump for sample suction, Item-No. 1000084
Connection pipe for Verprene-tubing 8/12, connection to storage tank "Sample
waste".
18 Diaphragm pump for NaOH, Item-No. 1001738
Connection pipe for PVC-tubing 8/12, connection to storage tank "NaOH"
* only Vap 45 with external titrator
4 Assembly and Installation
