19
Vapodest 45s
4.9.1. Connection of the external titrator
Please, make sure to study the enclosed instruction manual before using the titrator!
1. Set up titrator:
- Unpack titrator with utmost care and place titrator next to Vapodest.
2. Connect the titration tubes
Using utmost care, slide the tip of the titration tube (pos. 1) through the opening
till it makes contact with the titration cell. Make sure that after the titration cell
is filled, the tip must be immersed completely.
Guide the other end of the titration tubing from the front of the instrument to
the titrator.
3. Connect the interface cable with the interface RS 232 of the Vapodest.
4. Provide mains connection for the titrator
4.9.2. Connection of the electrode
Please, make sure to study the enclosed instruction manual before using the
electrode!
1. Unpack electrode (pos. 2) with utmost care and connect it with the electrode
cable.
2. Insert the electrode carefully through the opening into the titration cell till the
limit stop.
3. The electrode cable has to be guided through the wall duct from the front of
the instrument. Then, connect it to the previewed connection for the titrator
Notice:
The electrode has to be
calibrated regularly
. Please follow the instruction manual
of the titrator.
4 Assembly and Installation
Fig. 5.6.b.
Connection electrode and
titration tube in the re-
ceiver
