25
Vapodest 45s
6 System settings
6.3. Reagents
Menu for setting the level control in the tank and calibrating the pumps.
The delivery rate of the pump depends on the viscosity of the chemicals used, the
delivery height and various other conditions. Thus, you must calibrate the dosing
pumps prior to the first operation or whenever the chemicals used are changed.
Vapodest 45s
Standby
Reagents
turn
press
Tank control
Active
drücken
press
H2O Pump
XXXml/min
Tank control
< Active >
turn
-
Active
when using set of tank with level sensor
(e.g. with KAN 40/ KAN 50)
-
Not active
when using other tank sets
press
6.3.2. Calibrate dosing pumps
The calibration of the pump can only be done if you put
in an empty digestion tube. Make sure that the tanks
are filled with the respective chemicals.
press
6.3.1. Set level sensor for tank
